Linear and rotational microhydraulic actuators driven by electrowetting

Microhydraulic actuators offer a new way to convert electrical power to mechanical power on a microscale with an unmatched combination of power density and efficiency. Actuators work by combining surface tension force contributions from a large number of droplets distorted by electrowetting electrodes. This paper reports on the behavior of microgram-scale linear and rotational microhydraulic actuators with output force/weight ratios of 5500, cycle frequencies of 4 kilohertz, <1-micrometer movement precision, and accelerations of 3 kilometers/second2. The power density and the efficiency of the actuators were characterized by simultaneously measuring the mechanical work performed and the electrical power applied. Maximum output power density was 0.93 kilowatt/kilogram, comparable with the best electric motors. At maximum power, the actuator was 60% efficient, but efficiencies were as high as 83% at lower power. Rotational actuators demonstrated a torque density of 79 newton meters/kilogram, substantially more than electric motors of comparable diameter. Scaling the droplet pitch from 100 to 48 micrometers increased power density from 0.27 to 0.93 kilowatt/kilogram, validating the quadratic scaling of actuator power.

Source: – Science Robotics Latest Content

Leave a Reply

Your email address will not be published. Required fields are marked *